Vickers PV080R1D1C1NFFC4211 Piston Pump PV Series

Flinger Type:None; Bearing Outer Ring Material:Steel; Ball Material:Steel; End Cap Groove:No; Grease Type:Unirex N2; Bearing Bore Shape:Round; Retainer Type:Std Retainer; Ball Bearing Housing Series:209 Series; Brand:Baldor-Dodge; Housing Material:Cast Iron;

Bearing Locking Device:Eccentric Collar; Ball Bearing Housing Series:208 Series; Seal Type:Single Lip; Manufacturing Plant Location:Rogersville, TN; Flinger Type:None; Housing Material:Cast Iron; Ring Size:Standard; Retainer Type:Std Retainer; Retainer Material:Nylon; Brand:Baldor-Dodge;

Characteristic outer ring frequency, BPF0:7.6 Hz; Nlim:2,800 rpm; k:8 mm; Characteristic rolling element frequency, BSF:6.17 Hz; Characteristic inner ring frequency, BPFI:10.4 Hz; Nref:2,000 rpm; b:16.9 mm; B:80 mm; Max operating temperature, Tmax:200 °C; ra max:2.5 mm;

Recommended tightening torque for set screw:5.5 Nm; d:12 mm; Z:45 mm; T min.:-20 °C; B:31 mm; N:13mm; H2:65 mm; L:127 mm; Designation of housing:P204N-; Dz:54 mm;

Weight:1.03 kg; A1:25 mm; H2:84 mm; L:94 mm; Designation of closed end cover:SCC206; Dz:70 mm; A:48 mm; T min.:-20 °C; H1:13 mm; T max.:100 °C;

J:176 mm; Weight:3.49 kg; L:222 mm; H2:124.5 mm; Designation of bearing:UK211G2H; C0:29.2 kN; C:43.55 kN; B:33 mm; T max.:100 °C; Adapter sleeve reference:H2311;

Dz:54 mm; Z:46.2 mm; H3:62; A:25.5 mm; A1:6 mm; T min.:-20 °C; C:12.8 kN; d1:32.4 mm; T max.:100 °C; e:10 mm;

F:120 mm; da min:115 mm; t:2.5 mm; d:110 mm; B:30 mm; Brand:NTN; ras max:1 mm; Lubrication hole on inner ring:Non/No; Precision class:P0; rs min:1 mm;

N:14mm; A:40 mm; A2:58.9 mm; B1:56.3 mm; d1:62 mm; Weight:2.56 kg; Recommended tightening torque for set screw:8 Nm; Designation of bearing:EX209-26G2T04; S:21.4 mm; C:31.85 kN;

S:15.9 mm; G:R1/8"; H1:11 mm; Z:52.3 mm; A1:25 mm; L1:22 mm; T min.:-20 °C; Designation of open end cover:SCOU206-19; C0:11.2 kN; H2:82 mm;

C:52.5 kN; Designation of housing:FCE212-; Weight:3.91 kg; A:30.5 mm; s1:31 mm; C0:32.8 kN; Designation of bearing:UK212G2H; B1:62 mm; d:55 mm; T max.:100 °C;

Z:30.9 mm; B:42.9 mm; T max.:100 °C; T min.:-20 °C; C0:15.2 kN; H:155 mm; S:17.5 mm; L:92 mm; Recommended tightening torque for set screw:8 Nm; N:14mm;

T min.:-20 °C; A1:34 mm; H1:19 mm; A:54 mm; Designation of housing:P208-; B1:43.7 mm; L1:52 mm; G:M6x1; d1:58 mm; s1:33.4 mm;

H1:20 mm; Designation of bearing:UC209-26G2T04; H2:106 mm; E:22 mm; A:54 mm; Designation of housing:PG209N-; H:53.9 mm; d:41.28 mm; J:85 mm; T max.:100 °C;

C:25.7 kN; C0:15.2 kN; N:10,5mm; d:34.92 mm; L:93.7 mm; Recommended tightening torque for set screw:8 Nm; A1:5 mm; T max.:200 °C; A2:23.5 mm; S:8.5 mm;