CONSOLIDATED BEARING NUTR-45100X Cam Follower and Track Roller - Yoke Type

D:625 mm; Fatigue load limit Pu:1220 kN; r1,2 min.:3 mm; r3,4 min.:4 mm; Thrust factor K:1.83; D1 ≈:583 mm; B:385 mm; Calculation factor Y2:3.3; Basic dynamic load rating C:7100 kN; d1 ≈:514 mm;

Specific dynamic load factor K:120 N/mm²; Coefficient of friction µ min.:0.02; Mass strip:1.02 kg; H:3.06 mm; L:500 mm; Permissible sliding velocity v min.:0 m/s; Permissible sliding velocity v max.:2.5 m/s; Specific static load factor K0:250 N/mm²; B:100 mm; Coefficient of friction

D:280 mm; Oil:116.830 kN; with cylindrical bore:1 000 min-1; B:74 mm; d:180 mm; rs (min):2.1 mm; Pu:725 kN; Static (Cor):11.1 mm; Grease:1230 kN; with tapered bore:1 300 min-1;

d2:68.659 mm; H2:33.337 mm; H:114.3 mm; Limiting speed:1600 r/min; Attachment bolt diameter G:15.875 mm; da:44.45 mm; Mass bearing unit:4.22 kg; B:73.025 mm; S:0.794 mm; J min.:174.625 mm;

Fillet Radius ra:0.30 mm; Sealed Speed Rating n3:52000 rpm; d:3.200 mm; Basic Dynamic Radial Load Rating C:312 N; Grease Speed Rating Open/Shielded n1:75000 rpm; Basic Static Radial Load Rating Co:120 N; Shielded or Sealed B1:4.4 mm; Width Plain B:4.4 mm; Accessories:Two Seals; D:12.7000 mm;

Labyrinth ring (db shaft position):LOR 118; Bearing limiting speed:3400 r/min; Lock washer:W 20; Appropriate attachment bolt size G:0.875 in; N1:25.4 mm; End plug (suffix Y):EPR 15; A2:155.575 mm; Initial grease fill:365.71 g; Ca:55.804 mm; db:114.3 mm;

dk:60 mm; l2 max.:217 mm; C1 max.:28 mm; Material constant KM:330; G:M 42x3; α:7 °; r1 min.:0.6 mm; Mass rod end:2.45 kg; h:163 mm; d:45 mm;

Oil Speed Rating n2:1100 rpm; Fillet Radius rb:1.50 mm; D:500.0000 mm; Basic Dynamic Radial Load Rating C:1080000 N; Basic Static Radial Load Rating Co:2120000 N; Fillet Radius ra:4.00 mm; B:190.00 mm; d:240.000 mm; Grease Speed Rating n1:880 rpm;

D:55.0000 mm; B:13.00 mm; Basic Static Radial Load Rating Co:8300 N; Grease Speed Rating Open/Shielded n1:12000 rpm; Accessories:Snap-Ring; Oil Speed Rating Open/Shielded n2:15000 rpm; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:8000 rpm; d:30.000 mm; Basic Dynamic Radial Load Rating C:13300 N;

L:679.45 mm; Cap bolt:4 x 3/4-10 UNC; Adapter sleeve assembly:SNW 36x6.5/16; J min.:530.225 mm; ba:75.406 mm; Initial grease fill:1304.1 g; Cap bolt, SAE grade:5; Housing:SAF 536; Da:319.999 mm; Mass pillow block:137 kg;

Fillet Radius ra:1.00 mm; Oil Speed Rating n2:34000 rpm; d:25.000 mm; Basic Static Radial Load Rating Co:19300 N; Fillet Radius rb:0.60 mm; Basic Dynamic Radial Load Rating C:27600 N; D:52.0000 mm; B:30.00 mm; Grease Speed Rating n1:22000 rpm;

Oil Speed Rating Open/Shielded n2:10000 rpm; Basic Static Radial Load Rating Co:20000 N; Accessories:Synthetic Rubber Sea; Grease Speed Rating Open/Shielded n1:8500 rpm; Fillet Radius ra:1.50 mm; D:80.0000 mm; B:34.93 mm; Sealed Speed Rating n3:6000 rpm; Basic Dynamic Radial Load Rating C:36400 N; d

D2R:30.2 mm; Oil Speed Rating n2:20000 rpm; Grease Speed Rating n1:15000 rpm; D:32.0000 mm; Sealed Speed Rating n3:15000 rpm; Basic Dynamic Radial Load Rating C:10400 N; d:12.000 mm; Fillet Radius ra:0.64 mm; Basic Static Radial Load Rating Co:5600 N; B:15.9 mm;

h:110 mm; l2 max.:149 mm; l7 min.:34 mm; d2 max.:75 mm; l1 min.:65 mm; Mass rod end:0.9 kg; G:M 30x2; dk:40.7 mm; Basic static load rating C0:81.5 kN; C1 max.:20 mm;

R1:46.038 mm; A1:79.375 mm; Stabilizing ring:SR-15-0; End plug (suffix Y):EPR 8; H:161.925 mm; N1:19.05 mm; PG:1/8 NPT; Housing:SAFS 215; Bearing:22215 E; P60°:104 kN;